Sunday, January 2, 2011

Aotomate deployment with capistrano

https://github.com/capistrano/capistrano/wiki/2.x-From-The-Beginning
https://github.com/capistrano/capistrano/wiki
---------------------------------------------------------------------------

There are several helper methods that Capistrano provides for you to use in your recipes. These helpers vary in purpose from executing commands, to transferring files, to manipulating the output of a command:

Roles

  • role Associates a role with multiple servers. Also lets you define dynamic roles that get their server lists at run-time. (more...)
  • server Associates a server with multiple roles. (more...)

Tasks & Namespaces

  • task Defines (or redefines) a new task that you can invoke via the Capistrano command-line utility, "cap". (more...)
  • desc Associates a description with the next task that gets defined. (more...)
  • namespace Defines (or reopens) a new namespace, within which you can define other namespaces and tasks. (more...)
  • top Returns a reference to the topmost namespace. (more...)
  • before Declare that some action or task should occur before another task. (more...)
  • after Declare that some action or task should occur after another task. (more...)

Variables

Variables can be transparently referenced (though not assigned) in a Capistrano recipe file or task, simply by referencing them as if they were a local variable. Note, though, that to set a Capistrano variable you must resort to the set() method. See also Configuration Variables.
  • set() Associates a value with a variable. (more...)
  • unset() Deletes a variable. (more...)
  • exists?() Queries whether a variable has been set. (more...)
  • fetch() Returns the value of a variable, or a default value if the variable has not been set. (more...)

Execution

  • transaction() Begin a transaction, within which errors may trigger on_rollback clauses. (more...)
  • on_rollback() Specify code to be executed if an exception is raised within a transaction block. (more...)
  • current_task() Return a reference to the task that is currently being executed. (more...)
  • find_and_execute_task Execute a specified task at fully-qualified path. (more...)
Capistrano's multistage extension provides an easy way to use a different deployment strategy for different scenarios. For instance, for your application, you might have two servers: one for production, where the "live" code is, and one for staging, where you can test features out without risk of affecting anything critical. Certain deployment values, such as the application name, UNIX user and group, and application environment might be the same, but other values might be different, such as the location of the server itself or the SCM repository branch. Instead of repeating code in your Capfile, you can use multistage to set the values which are different in separate files, and only load those files at runtime.
This article will walk you through installing and using the multistage extension. We're going to use the example we mentioned earlier, where we have a production server and a staging server. So naturally, we would like two deployment stages, production and staging. We also assume you're creating an application from scratch.

Installation

The multistage extension actually lives within the capistrano-ext gem. So first let's install Capistrano itself and then that:
gem install capistrano capistrano-ext
Then, let's make a directory for our application and capify it:
mkdir ~/apps/capistrano-multistage-test
cd ~/apps/capistrano-multistage-test
capify .
Now open config/deploy.rb and replace it with this content:
set :stages, %w(production staging)
set :default_stage, "staging"
require 'capistrano/ext/multistage'

set :application, "capistrano-multistage-test"
set :user, "www-data"
set :group, "www-data"

set :scm, :git
set :repository, "ssh://ourserver/#{application}.git"
set :deploy_to, "/var/www/#{application}"
set :deploy_via, :remote_cache
set :deploy_env, 'production'
So what are we doing here? Well, first we tell Capistrano what our stages are. This will allow us to say cap production TASK or cap staging TASK to run a task within a specific stage. We also set the default stage to "staging", that way we can simply say cap TASK and it will execute the task within the "staging" stage by default. Then, we bring in the multistage code (yes, after we configure the stages -- it's just the way the extension works). Finally, we set some variables that will be common to our stages.
Let's also add a small task that we can use to test our stages:
task :uname do
  run "uname -a"
end
So that takes care of our main config file. What about the stages themselves?
Well, when you say cap my_stage TASK (for instance), Capistrano looks for a file config/deploy/my_stage.rb and loads it. It's in this file that you configure the variables and tasks that apply to that stage.
So first we need to create the directory that will house our stage configuration files:
mkdir config/deploy
Then we create two files, config/deploy/production.rb and config/deploy/staging.rb. In config/deploy/production.rb, we can do something like this:
server 'production.server.com', :app, :web, :primary => true
And in config/deploy/staging.rb we can do something like this:
server 'staging.server.com', :app, :web, :primary => true
That's it! If we were now to run cap production uname, the uname task would get executed on production.server.com; if we were to run cap staging uname, it would get run on staging.server.com. If we were to run simply cap uname, that would also happen on the staging server, since we set "staging" to the default earlier.
It's worth nothing that anything we would normally put in our Capfile, we can also put in our stage files. So if, say, we were using Nginx + Unicorn on our production server but Apache on our staging server, we could override the deploy:restart task only for the production stage by putting this in config/deploy/production.rb:
namespace :deploy do
  task :start do
    # ...
  end

  task :stop do
    # ...
  end

  task :restart do
    # ...
  end
end

There are several helper methods that Capistrano provides for you to use in your recipes. These helpers vary in purpose from executing commands, to transferring files, to manipulating the output of a command:

Invocation

  • run Execute commands on one or more servers (more...)
  • sudo (Deprecated) Execute commands on one or more servers via sudo. (more...)
  • parallel Execute multiple commands on multiple servers in parallel (more...)

Inspection

  • capture Executes a command on a single host and returns ("captures") the output as a string. (more...)
  • stream Very similar to run, but optimized for displaying live streams of text (like tailed log files) from multiple hosts. (more...)

File Transfer

The file-transfer actions all use either scp or sftp to move files to or from the remote hosts.
  • put Store the contents of a file on multiple servers. (more...)
  • get Transfers a file from a single remote server to the local host. (more...)
  • upload Transfers a file or directory from the local host to multiple remote hosts, in parallel. (more...)
  • download Transfers a file or directory from multiple remote hosts to the local host, in parallel. (more...

Capistrano Handbook

Index

Anatomy of a Capistrano installation

Typically inside your application you will have a structure not dissimilar to the following:
/
|- public/
|- config/
|- application/
Regardless of your application's nature you would usually expect to have these directories; whether or not they exist is largely academic.
Capistrano relies on you having a config directory into which it will install a deploy.rb file that contains your settings.
The deploy.rb file is loaded when you call cap on the command line; in the event that you aren't in the root of your application (or more accurately that there isn't a capfile) in your present working directory, cap will search up the directory structure until it finds one, this may include your home directory.
Beware of this when dealing with multiple projects, or nested projects - this feature was intended so that you could run a deploy, or open a cap shell without moving to the root of your application.
Typically capifying an application will create something akin to the following:
set :application, "set your application name here"
set :repository,  "set your repository location here"

# If you aren't deploying to /u/apps/#{application} on the target
# servers (which is the default), you can specify the actual location
# via the :deploy_to variable:
# set :deploy_to, "/var/www/#{application}"

# If you aren't using Subversion to manage your source code, specify
# your SCM below:
# set :scm, :subversion

role :app, "your app-server here"
role :web, "your web-server here"
role :db,  "your db-server here", :primary => true
If your application is not separated into application, web and database servers, you can either set them to be the same value; or comment out, or remove the one you do not require.
Typically for a PHP application one would expect to comment out the web or app roles, depending on your requirements. Certain built in tasks expect to run only on one, or the other kind of server.
The :primary => true part of the role definitions allows you to have more than one database server, this could easily also be written either of the following two ways:
role :db, 'db1.example.com', 'db2.example.com'
-- or --
role :db, 'db1.example.com', 'db2.example.com', :primary => true
If you have two servers, and neither is primary, or
role :db, 'db1.example.com', :primary => true
role :db, 'db2.example.com'
If, for example when deploying a Rails application you only wanted db1 to run migrations, in the first example both might.
Essentially when using the Rails deployment recipes, the :primary option defines where database migrations are run.
Similar attributes include :no_release often used for the :web role by some of the recipes in circulation to decide which servers should not have the code checked out to them.
Attributes like these are arbitrary and you can define some of your own, and use them to filter more precisely where your own tasks run,
You may want to read more about the role method as it has a few options. There is the alternate [server] method which works slightly differently, the examples should demonstrate how-so.
role :db, 'www.example.com'
role :app, 'www.example.com'
role :web, 'www.example.com'
And the server method:
server 'www.example.com', :app, :web, :db
If you have a lot of multi-function servers, or perhaps just one server running your whole application the server method may be a quick and easy way to remove a few LOC and a little confusion from your deployment configuration files.
Other than the shorter syntax, they are functionally equivalent.

Building Blocks Variables & Tasks

Tasks

Tasks are the foundation of a Capistrano setup; collections of tasks are typically called Recipes.
Tasks are defined as such, and can be defined anywhere inside your Capfile or deploy.rb; or indeed any other file you care to load into the Capfile at runtime.
desc "Search Remote Application Server Libraries"
task :search_libs, :roles => :app do
  run "ls -x1 /usr/lib | grep -i xml"
end
Lets break that down a little...
The desc method defines the task description, this shows up when using cap -T on your application.. these are arbitrary description strings that can be used to help your users or fellow developers.
Tasks without a description will not be listed by a default cap -T, but will however be listed with a cap -Tv. More command line options for the cap script will be discussed later in the handbook.
The task method expects a block, that is run when the task is invoked. The task can, typically contain any number of instructions, both to run locally and on your deployment target servers (app,web,db).
Namespacing Tasks
It stands to reason that with such a wide scope of available uses, there would be potential for naming clashes, this isn't a problem localized to Capistrano; and elsewhere in the computer sciences world this has been solved with Namespacing; Capistrano is no different, take the following example:
desc "Backup Web Server"
task :backup_web_server do
  puts "In Example Backup Web-Server"
end

desc "Backup Database Server"
task :backup_database_server do
  puts "In Example Backup Database-Server"
end
Defining a task in this way, and more about how the task blocks are arranged is forthcoming; however imagine we had two tasks backup perhaps, that needed to work differently on different roles.. here's how namepsaces solve that problem
namespace :web_server do
task :backup do
  puts "In Example Backup Web-Server"
end
end
namespace :database_server do
task :backup do
  puts "In Example Backup Database-Server"
end
end
Whilst the tasks in the first example might be listed by cap -T as:
backup_database_server    Backup Database Server
backup_web_server         Backup Web Server
And invoked with either cap backup_database_server or cap backup_web_server; the second pair of examples would be listed by cap -T as
database_server:backup    Backup Database Server
web_server:backup         Backup Web Server
and similarly invoked with cap database_server:backup or cap web_server:backup
Namespaces have an implicit default task called if you address the namespace as if it were a task, consider the following example:
namespace :backup do

  task :default do
    web
    database
  end

  task :web, :roles => :web do
    puts "Backing Up Web Server"
  end

  task :db, :roles => :db do
    puts "Backing Up DB Server"
  end

end
Note: These are nested differently to the two previous examples, as when looked at in these terms it makes a lot more sense to namespace them this way, and simply call the following
  • To backup just the web server:
    $ cap backup:web
  • To backup just the db server:
    $ cap backup:db
  • To back up both in series:
    $ cap backup
It is important to note here that when calling tasks from within tasks, unlike with rake where they syntax might be something like Rake::Tasks['backup:db'].invoke, with Capistrano you simply name the task as if it were any other ruby method.
When calling tasks cross-namespace, or for readability you can (and often should) prefix the task call with the namespace in which the task resides, for example:
namespace :one do
  task :default do
    test
    one.test
    two.test
  end
  task :test do
    puts "Test One Successful!"
  end
end

namespace :two do
  task :test do
    puts "Test Two Successful"
  end
end
Calling cap one would output:
Test One Successful
Test One Successful
Test Two Successful
This gets slightly more complicated as the namespace hierarchy becomes more intricate but the same principles always apply.
Namespaces are nestable, an example from one of the core methods is cap deploy:web:disable a disable task in the web namespace which in turn resides in the deploy namespace.
There is a top namespace for convenience, and it is here that methods defined outside of an explicit namespace block reside by default. If you are in a task inside a namespace, and you want to call a task from a higher namespace, or outside of them all, prefix it with top and you can define the path to the task you require.
Existing Tasks
Unlike rake when you define a task that collides with the name of another (within the same namespace) it will overwrite the task rather than adding to it.
Chaining Tasks
As this is considered to be a feature, not a limitation of Capistrano; there is an exceptionally easy way to chain tasks, including but not limited to the default task for each namespace, consider the following
namespace :deploy do
  # .. this is a default namespace with lots of its own tasks
end

namespace :notifier do
  task :email_the_boss do
    # Implement your plain ruby emailing code here with [`TMail`](http://tmail.rubyforge.org/)
  end
end

after (:deploy, "notifier:email_the_boss")
Note the different arguments, essentially it doesn't matter how you send these, strings, symbols or otherwise, they are automagically red through to ascertain what you intended, I could just have easily have written:
after ('deploy', "notifier:email_the_boss")
The convention here would appear to be, when using a single word namespace, or task name; pass it as a symbol otherwise it must be a string, using the colon-separated task notation.
There are both before, and after callbacks that you can use, and there is nothing to stop you interfering with the execution of any method that calls another, take for example that at the time of writing the implementation of deploy:default might look something like this:
namespace :deploy do
  task :default
    update
    update_code
    strategy.deploy!
    finalize_update
    symlink
    restart           # <= v2.5.5
  end
end
More Info: Default Execution Path on the Wiki
Here we could inject a task to happen after a symlink, but before a restart by doing something like:
after("deploy:symlink") do
  # Some more logic here perhaps
  notifier.email_the_boss
end
Which, unless we need the # Some more logic here perhaps part could be simplified to:
after("deploy:symlink", "notifier:email_the_boss")
The first example shows the shorthand anonymous-task syntax.
Calling Tasks
In the examples we have covered how to call tasks on the command line, how to call tasks explicitly in other tasks, and how to leverage the power of callbacks to inject logic into the default deploy strategy. The same techniques of before() and after() callback usage, and your own tasks and namespaces will become important once you start to get beyond the default deployment steps.
When calling tasks on the command line, most never have to go further than the standard cap deploy call; this as you can see from the example above, actually calls a lot of tasks internally, but there is nothing to stop you calling these individually; most rely on other steps, or having queried your choice of source control to get the latest revision, but some can be called directly, consider some of the following:
$ cap deploy:symlink  # re-run the method to symlink releases/<tag> to current/
The trivial example above directly calls one task from a namespace from the command line, another more useful example of this might be:
namespace :logs do
  task :watch do
    stream("tail -f /u/apps/example.com/log/production.log")
  end
end
Which you could then call with:
$ cap logs:watch
Nothing restricts you calling namespaced tasks directly except their potential data prerequisites.
Another interesting, and often overlooked way of invoking tasks on the command line comes in the form of:
$ cap task1 task2 namespace1:task1
Which would call, task1, task2, namespace1:task1 in order. You can really make use of this; for example you may want to do something like the following to deploy your app, and immediately follow the logs looking for problems.
$ cap deploy logs:watch
A more interesting application for this technique comes in the form of the Multi-Stage Extension, which qualifies for its own section of the handbook; we'll discuss a simpler implementation briefly here.
The Multi-Stage Extension is designed for deploying the same application to multiple stages (development, preview, staging, production, etc) and is usually invoked as such:
$ cap production deploy
$ cap production logs:watch
$ cap staging deploy
$ cap staging deploy:rollback logs:watch
The Multi-Stage Extension may be implementing something like the following internally:
set :application, 'example-website'

task :production do
  set :deploy_to, "/u/apps/#{application}-production/"
  set :deploy_via, :remote_cache
  after('deploy:symlink', 'cache:clear')
end

task :staging do
  set :deploy_to, "/u/apps/#{application}-staging/"
  set :deploy_via, :copy
  after('deploy:symlink', 'cruise_control:build')
end
When you call cap production deploy, two variables are set to production friendly values, and an callback is added to clear the live cache (however that might need to work for your environment), where when you call cap staging deploy those same two variables are given different values, and a different callback is registered to tell your imaginary Cruise Control server to rebuild and/or test the latest release.
The example above is trivial, but that should explain in a nut shell how the Multi-Stage Extension functions, and how you can implement your own quite easily; The Multi-Stage Extension is still well worth a look, as it is smart about ensuring you don't just run cap deploy and get yourself into trouble deploying an application with half of your configuration missing
Transactions
Transactions are a powerful feature of Capistrano that are sadly under-used, what would happen if your deploy failed?
Transactions allow us to define what should happen to roll-back a failed task, take a look at the following example:
task :deploy do
  transaction do
    update_code
    symlink
  end
end

task :update_code do
  on_rollback { run "rm -rf #{release_path}" }
  source.checkout(release_path)
end

task :symlink do
  on_rollback do
    run <<-EOC 
      rm #{current_path};
      ln -s #{previous_release} #{current_path}
    EOC
  end
  run "rm #{current_path}; ln -s #{release_path} #{current_path}"
end
Before deploy:symlink is run, the only thing required to roll-back the changes made by deploy:update_code is to remove the latest release.
In the deploy:update_code example, only one step is needed to undo the damage done by the failed task, for deploy:symlink there is a little more to it, and in this example this is implemented using the do..end block syntax also using a heredoc to pass a multi-line string to the run() command, in this instance, as you can see it removes the current symlink and replaces it with one to the previous_release.
If your roll-back logic was any more complicated than that, you may consider including a rake task with your application with some kind of rollback task that you can invoke to keep the deployment simple.

Variables

Capistrano has its own variable mechanism built in, you will not in the default deploy.rb that capify generates most of the variable assignment is done in the following manner:
set :foo, 'bar'
As set is quite a complex function, we will only brush the surface here.
Here are a few things to note:
set :username, 'Capistrano Wizard'

task :say_username do
  puts "Hello #{username}"
end
Note that we have a real ruby variable to use in our string interpolation, having used the Capistrano specific set method to declare, and assign to it.
One of the key benefits to using the set method is that it makes the resulting variable available anywhere inside the Capistrano environment, as well as being able to assign complex objects such as Procs to variables for delayed processing.
Set has a partner function fetch that functions similarly except that it is for retrieving previously set variables.
In addition, there is exists? which can be used to check whether a variable exists at all; this might be used to implement a solution to the missing stage problem we left unresolved in the Tasks section:
before :deploy do
  unless exists?(:deploy_to)
    raise "Please invoke me like `cap stage deploy` where stage is production/staging"
  end
end
For convenience Capistrano's internals use a method called _cset which is designed to non-destructively set variables, it is implemented using exists? and set, take a look:
def _cset(name, *args, &block)
  unless exists?(name)
    set(name, *args, &block)
  end
end
This can be used without you having to redefine it to set a variable, only in the event that it hasn't already been set. If you need to change the value of a variable, please just use set.
Part of the argument list to set is a &block, these can be used to lazy-set a variable, or compute it at runtime... take a look:
set :application, 'example-website'
set :deploy_to, { "/u/apps/#{application}-#{stage}" }

task :production do
  set :stage, 'production'
end

task :staging do
  set :stage, 'staging'
end
Note that on the second line of the example the stage variable doesn't exist, and were Capistrano to evaluate this inline, an exception would be raised.
However, as the deploy_to variable isn't used until further through the deployment process, in deploy:update, which we know when invoked with cap production deploy will run after the production task has defined the stage variable, the block that is assigned to :deploy_to won't be evaluated until then; this is often used by people who wish to have Capistrano ask for their passwords at deploy-time, rather than commit them to the source repository, for example:
set(:user) do
   Capistrano::CLI.ui.ask "Give me a ssh user: "
end
This prompt won't be displayed until the variable is actually required, which of course depending on the configuration of your callbacks, may be never at all, this is a very valuable feature that can help ensure your low-level staff or colleagues don't have access to sensitive passwords for production environments that you may wish to keep a secret.
Note: The curly-brace, and do..end syntaxes are purely a matter of taste and readability, choose whichever suits you better, this is Ruby syntax sugar, and you may use it as you please.
Posted by at No comments:

Deploying Rails applications on Heroku

Installation:

# gem install heroku

# heroku keys:add

# heroku help

Setup SSH Key:
Please follow the link  Generating SSH key on Linux
Please follow the link Generating SSH key on windows

Create application on heroku

# heroku create [name of the app]

# cd [Path to my app]
# git init
# git add .
# git commit -m "[New app name]"

# git push heroku master
# heroku rake db:migrate
Posted by at No comments:

Setting up git and start code sharing

Setting up SS connection with GitHub

$ sudo apt-get install ssh-keygen
# Generate the ssh public and private key by using following command
$ ssh-keygen -t rsa -C "some@emailid.com"
# The above command will generate private and public key pair as rsa_id and rsa_id.pub. Now copy the #rsa_id.pub content to public key a/c in GitHub page. and copy the rsa_id (private kye file) to root location #of ssh key generator tool(.ssh) if you are not in the root of .ssh already.
# Run the following command to check the connection
$ ssh git@github.com

Global setup:

Download and install Git
  git config --global user.name "[ ]"
  git config --global user.email [ ...@gmail.com]

Next steps:

rails -new  [AppName]
  cd [AppName]
  git init
  touch README
  git add README
  git commit -m 'first commit'
  git remote add origin git@github.com:bhupendramishra/[AppName].git
  git push origin master
Posted by at No comments:
Subscribe to: Comments (Atom)